geordanirishterriers014014.jpg
geordanirishterriers014013.jpg
geordanirishterriers014012.jpg
geordanirishterriers014011.jpg
geordanirishterriers014011.jpg
geordanirishterriers014010.jpg
geordanirishterriers014009.jpg
Places to get Dog ear glue click on the link below
Jiffy Products - Jiffy Sew
Val-A Chicago - Tear Mender
This is the normal ear position
The yellow area is where the glue should be placed
Dotted line indicate where the adult ear should be - relative to the standing position. Note that it is important that the crease overlap, and inset are correct (as shown).
Insert the tip of finger. Pinch the edge of the ear with the thumb and roll to create crease and lift. The lift creates the important overlap illustrated in the 3rd picture. Only the tiny bit of glue on the area in which the forward section of the ear overlaps the rising section can set the upper position of the ear.
This is the correct glued ear position. The upper position is glued flat. The ear is glued close to the base of the ear. There is an open air passage. The tip may vary slightly as shown.
This ear position is wrong. The forward section is not inset from the bell or is glued closed. There should be an open air passage.
This ear position is wrong. The upper ear stands above the skull.
geordanirishterriers014008.gif
geordanirishterriers014007.gif
geordanirishterriers014006.gif
geordanirishterriers014005.gif
geordanirishterriers014004.gif
geordanirishterriers014003.gif
geordanirishterriers014002.gif
geordanirishterriers014001.gif
Setting Ears
arrowprev.png
arrownext.png
invhome.gif